|
*Everything you need to get started in Digitrax Command Control for a great low price.
*Zephyr Xtra is perfect for beginning, intermediate and advanced model railroaders. It is easy to use and has tons of features.
*Zephyr Xtra offers excellent speed control, prototypical consisting, the full range of programming features and much more.
*Zephyr Xtra is a breath of fresh air in model railroading.
Note: Existing DCS50s/Zephyrs are not upgradable to the new DCS51s/Zephyr Xtras. The DCS51 is a completely new board design with additional keys and additional functionality.
Zephyr Xtra Set Includes:
*DCS51 All-In-One Throttle/Command Station/Booster to run your layout
*PS314 Power supply to provide power to run your DCS51
*One LT1 LocoNet Cable & Decoder Test Kit
* Quickstart Guide
* Zephyr Xtra Manual
* Digitrax Decoder Manual
Zephyr Xtra Offers:
*Simple to use controls for running trains.
*Large speed control knob and direction switch with brake.
*Full numeric key pad.
* Easy 2 and 4 digit addressing.
*Smooth speed control.
Run multiple trains at once without blocking!
*Run up to 20 addresses at the same time on your system.
*Run up to 20 throttles at the same time on your system.
Jump Ports for using DC power packs as additional throttles
* Use one or two smooth DC power packs as throttles to control DCC equipped locomotives.
*Simple, cost effective way to add more throttles to your Zephyr Xtra set.
*Makes it easy to share the fun of DCC with layout visitors and young operators.
*Functions on locos controlled by Jump throttles remain active.
Over 9000 Locomotive Addresses
*Use Address 00 to run one or more locos without DCC decoders
* Two Digit Addressing is easy to use. (Address 01-127)
*Four Digit Addressing-use the number painted on your engines as its address.
3.0 Amps of Power to run multiple trains.
* Booster outputs 13V DC for safe operation in N and HO scales.
Function Control
* Control 29 functions-F0 through F28.
* Function 2 is a special non-latching key that can be used to sound the horn for as long as the key is held down.
*Constant brightness lighting. Headlights can be directional or independently controlled (depending on decoder).
Stationary Decoders, Turnout Control & Turnout Position Reporting
*Access to stationary decoder control for turnouts and other devices.
* Control 999 stationary decoder addresses.
Consisting
* Universal consisting, Digitrax preferred method. ALL locos can be consisted, even analog locos.
*Advanced consisting, allows only advanced consist capable mobile decoders.
*Basic consisting, program decoders to run on same address.
Decoder Programming
* Built in read/write programmer that can read and write all CVs.
*Supports Paged programming (Digitrax preferred method). Also supports direct & register mode programming.
*Operations mode programming can be used to program decoders on the layout.
Expandability with Digitrax LocoNet
* Use Zephyr Xtra as a starting point for your Digitrax LocoNet System, then add components.
*Use Zephyr Xtra as an expansion set with Digitrax equipment you already have installed.
* Add Radio or IR via LocoNet. Just plug in a UR90 or UR91 receiver and add IR and/or Radio throttles.
|
